硬度計是測量物體硬度的儀器，表示材料抵抗硬物體壓入其表面的能力。它是金屬材料的重要性能指標之一。一般硬度越高，耐磨性越好。根據所測硬度單位：洛氏硬度計、維氏硬度計、顯微硬度計、布氏硬度計、邵氏硬度計、巴氏硬度計、里氏硬度計、韋氏硬度計、肖氏硬度計、布洛維硬度。根據使用方式：便攜式硬度計、臺式硬度計。

進口硬度計美國Check-Line AD-100型硬度計專為測量運動鞋墊，軟質橡膠，軟硬彈性體，塑料，泡沫、海綿橡膠凝膠和動物組織的硬度而設計， Asker C型適用于運動鞋廠，測鞋墊泡沫。

The Check-Line AD-100 durometer tester is the genesis of years of experience offering high quality Durometers to discriminating users. Featuring an 18mm footer that offers high stability and conforms to all international standards, the AD-100 is the ideal durometer for a wide range of shore hardness measuring applications.

AD-100型硬度計是一款美國Checkline憑借多年實踐經驗，為滿足不同客戶需求而打造的一款硬度計。AD-100不僅穩定性高，還可以滿足所有的國際標準，18mm的標尺的大量程使得硬度計滿足非常多的肖氏硬度測量應用。

Seven models are available each calibrated for a different Shore scale including; Shore A, Shore B, Shore C, Shore D, Shore DO, Shore O, Shore OO and Asker C.

AD-100系列有7個型號，分別進行不同測量標準的校準，包括：A, B, C, D, DO, O, OO, Asker C.

The AD-100 displays hardness readings on an easy-to-read analog scale calibrated in 0 to 100 Shore units. An optional MEMORY POINTER holds reading until manually reset, allowing operator to concentrate on measurement task. Also valuable if used in a position where dial is obstructed.

AD-100是配備的簡單易讀硬度模擬值顯示屏，經過0-10值校準。同時可以選裝內存指南針對讀書進行保存，直到手動重置可刪除，在刻度卡住的時候減少很多麻煩。

Note: Optional Memory Pointer is unable to be used with Type OO durometers.

All AD-100 models are supplied in a foam-fitted protective carrying case along with reference test block and NIST traceable calibration certificate.

注意：內存指南針不可以用于OO型的硬度計，所有的AD-100型號都是帶儀表箱和標準測試塊和NIST校準證書。