ThenewDakotaMMX-7isafullfeaturedultrasonicthicknessgaugeofferinganoversizeddisplayaswellasacompletealphanumericdataloggingsystemwithstoragecapacityofthousandsofdatavalues

產品型號：

更新時間：2024-06-26

廠商性質：代理商

訪問量：211

產品咨詢 13352927502

詳細介紹在線留言

The new Dakota MMX-7 is a full featured ultrasonic thickness gauge offering an oversized display as well as a complete alphanumeric datalogging system with storage capacity of thousands of data values.

The MMX-7 features the highest resolution graphic LCD on the market and is especially engineered for optimal ease of use.

美國Dakota MMX-7超聲波測厚儀自帶大尺寸顯示功能和一套完整的數據采集系統，可存儲上千數據值。其LCD圖形顯示屏分辨率高，造作簡單，使用方便。

MMX-7不僅兼容了MX系列探頭的耐久性等特長，還增加了涂層穿透功能--在被測物表面有油漆時，無需去除油漆而測量材料的凈厚度。自帶的RS-232串口輸出，可下載數據給打印機和電腦。

除了以上MMX-6DL的全部功能，MMX-7的屏幕更大，增加了B掃描功能，存儲量更大，多個校準和材料選擇選項，選擇低，中或高增益的選擇。

The time-based B-Scan feature displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material.
Built in hardware AGC gain control for through paint measurements in multi mode operation.
The MMX-7 has the ability to store 64 custom user defined setups. All factory setups can be selected, edited and saved to any setup location.
CE Certified
Use the visual alarm to set hi and lo limits for applications requiring specific tolerances. If the actual thickness value is above or below the limits, a red light is illuminated.
The MMX-7 also comes complete with our Windows® PC software for transferring data to and from a PC.
The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material, and display the minimum measurement scanned.
Use the AUTOFIND feature to locate the detection point, while automatically adjusting the display to bring the signal into view.
Includes NIST-Traceable Calibration Certificate
2 Year Warranty

測量
P-E(脈沖-回波)模式	0.63~254mm
PECT(脈沖-回波涂層)模式	-
PETP(脈沖-回波溫度補償)模式	-
E-E(回波-回波)模式	1.27~102mm
E-EV(回波-回波驗證)模式	-
CT(測量涂層)模式	-
分辨率	0.01mm
聲速范圍	1250～9999m/s
單位	公制或英制
顯示
顯示屏	VGA灰色顯示，240x160象素?？梢晠^(qū)62x45.7mm，EL背光
顯示屏(彩色)	-
A-掃描	-
B-掃描	穿過斷面視場，顯示速度為每一屏15秒
大數字顯示	標準厚度顯示，10mm高
厚度條形掃描	每秒6個讀數，在B-掃描和大數字顯示中可見
超聲波參數
測量模式	P-E/E-E
脈沖	可調方波脈沖
接收	根據選擇模式在40dB范圍內采用手動或AGC增益控制
數據處理
內置存儲器	12000個讀數(每個讀數包括B掃描波形和儀器設置)
其他
電源	3節5號電池，可用150小時，電池電量顯示，無操作5分鐘后自動自動關機
鍵盤	12個觸摸鍵
外殼	擠壓鋁機殼，底蓋用鍍鎳鋁板加密封墊封裝
工作溫度	-10～60℃
尺寸	63.5x165x31.5mm
重量	含電池385g
質保	2年

訂貨清單

The MMX-7 is supplied as a complete kit with the gauge, T-102-2700 probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case.

訂貨型號

MMX-7 Dakota MMX-7 Ultrasonic Thickness Gauge with T-102-2700 PROBE, Z-160-0001

配件

TICC-MVX	Protective Holder for Long Body UT Gauges, F-149-0001
T-102-2700	1/4" diameter, 5.00 MHz, dual element, Hi-Damped transducer
T-104-0600	1/2" diameter, 1.00 MHz dual element Composite transducer
T-104-1000	1/2" diameter, 2.25 MHz dual element transducer
T-102-1000	1/4" diameter, 2.25 MHz, dual element transducer, Side-in
T-104-2000	1/2" diameter, 5.00 MHz dual element transducer
T-101-2000	3/16" diameter, 5.0 MHz dual element transducer
T-102-3300	1/4" diameter, 7.5 MHz, dual element transducer
T-044-2000	1/2" 5.0 MHz Hi-Temp (650 F / 344 C) Transducer
USB-RS232-ADAP	RS232 to USB Adapter
T-212-2001	1/4", 5 MHz Hi-Temp (900 F / 500 C) Transducer